Lithako tsa Silicon Graphite bakeng sa Aluminium ea ho Lahlela Lehlabathe
LIEKETSENG LIHLAHISO
Superior Thermal Conductivity
Motsoako o ikhethang oa silicon carbide le graphite o netefatsa ho futhumala ka potlako le ka mokhoa o ts'oanang, ho fokotsa haholo nako ea ho qhibiliha.
Khanyetso e Feteletseng ea Mocheso
Motsoako o ikhethang oa silicon carbide le graphite o netefatsa ho futhumala ka potlako le ka mokhoa o ts'oanang, ho fokotsa haholo nako ea ho qhibiliha.
Khanyetso e tšoarellang ea Corrosion
Motsoako o ikhethang oa silicon carbide le graphite o netefatsa ho futhumala ka potlako le ka mokhoa o ts'oanang, ho fokotsa haholo nako ea ho qhibiliha.
LIEKETSENG MOKHOPO
| Graphite / % | 41.49 |
| SiC / % | 45.16 |
| B/C / % | 4.85 |
| Al₂O₃ / % | 8.50 |
| Boima ba bongata / g·cm⁻³ | 2.20 |
| Ho bonahala ho porosity / % | 10.8 |
| Matla a ho pshatla/MPa (25℃) | 28.4 |
| Modulus of rupture/ MPa (25℃) | 9.5 |
| Mocheso o hanyetsanang le mollo/ ℃ | >1680 |
| Mocheso oa ho tsikitlana / Mehla | 100 |
| Sebopeho/Sebopeho | A (mm) | B (mm) | C (mm) | D (mm) | E x F boholo (mm) | G x H (mm) |
|---|---|---|---|---|---|---|
| A | 650 | 255 | 200 | 200 | 200x255 | Ka kopo |
| A | 1050 | 440 | 360 | 170 | 380x440 | Ka kopo |
| B | 1050 | 440 | 360 | 220 | ⌀380 | Ka kopo |
| B | 1050 | 440 | 360 | 245 | ⌀440 | Ka kopo |
| A | 1500 | 520 | 430 | 240 | 400x520 | Ka kopo |
| B | 1500 | 520 | 430 | 240 | ⌀400 | Ka kopo |
TS'EPISO TS'OANE
1. Tlhahiso e nepahetseng
graphite e phahameng-hloeka + premium silicon carbide + moemeli ea tlamellang.
.
2.Isostatic Pressing
Boima ba ho fihla ho 2.2g/cm³ | Mamello ea botenya ba lebota ± 0.3m
.
3.Mocheso o Phahameng oa Sintering
SiC particle recrystallization e etsa sebopeho sa marang-rang sa 3D
.
4. Ntlafatso ea Sefahleho
Anti-oxidation coating → 3 × e ntlafetseng ea ho hanyetsa kutu
.
5.Tlhahlobo e Matla ea Boleng
Khoutu e ikhethileng ea ho lata bakeng sa traceability e felletseng ea bophelo
.
6.Polokeho Packaging
Lera le monyang ho tsukutloa + Mothibelo oa mongobo + Mokotla o matlafalitsoeng
.
SEBELISA SEHLAHISO
Sebōpi sa ho qhibilihisa Khase
Sebōpi se qhibilihang sa Induction
Resistance Melting Furnase
KE HOBANE'NG LE RE KHETHA
FAQS
Q1: Melemo ea silicon carbide graphite crucibles ke efe ha e bapisoa le li-crucible tsa setso tsa graphite?
✅Ho hanyetsa Mocheso o Phahameng: E ka mamella 1800 ° C nako e telele le 2200 ° C nako e khutšoanyane (vs. ≤1600 ° C bakeng sa graphite).
✅Nako e Telele ea Bophelo: 5x e betere ho hanyetsa mocheso oa mocheso, 3-5x nako e telele ea bophelo ba tšebeletso.
✅Zero Tšilafalo: Ha ho na khabone e kenang, ho netefatsa bohloeki ba tšepe e qhibilihisitsoeng.
Q2: Ke litšepe life tse ka qhibilihang ka har'a li-crucibles tsee?
▸Litšepe Tse Tloaelehileng: Aluminium, koporo, zinki, khauta, silevera, joalo-joalo.
▸Reactive Metals: Lithium, sodium, calcium (e hloka ho roala ha Si₃N₄).
▸Litšepe tse Refractory: Tungsten, molybdenum, titanium (e hloka vacuum / inert khase).
Q3: Na li-crucible tse ncha li hloka kalafo pele li sebelisoa?
Ho Tlama ho Baking: Butle-butle mocheso ho 300 ° C → tšoara lihora tse 2 (e tlosa mongobo o setseng).
Tlhahiso ea Pele ea Melt: Qhibiliha sehlopha sa lintho tse setseng pele (e etsa lera le sireletsang).
Q4: Mokhoa oa ho thibela ho phatloha ha crucible?
Le ka mohla u se ke ua lefisa lintho tse batang ka har'a crucible e chesang (max ΔT <400 ° C).
Sekhahla sa ho pholisa ka mor'a ho qhibiliha <200°C/hora.
Sebelisa li-crucible tongs tse inehetseng (qoba tšusumetso ea mochini).
Q5: Mokhoa oa ho thibela ho phatloha ha crucible?
Le ka mohla u se ke ua lefisa lintho tse batang ka har'a crucible e chesang (max ΔT <400 ° C).
Sekhahla sa ho pholisa ka mor'a ho qhibiliha <200°C/hora.
Sebelisa li-crucible tongs tse inehetseng (qoba tšusumetso ea mochini).
Q6: The minimum order quantity (MOQ) ke bokae?
Mehlala e Tloaelehileng: sengoathoana sa 1 (mehlala e fumaneha).
Meetso e Tloaelehileng: likotoana tse 10 (litšoantšo tsa CAD lia hlokahala).
Q7: Nako ea ho etella pele ke efe?
⏳Lintho tse ka har'a Stoko: E tsamaisoa ka hare ho lihora tse 48.
⏳Litaelo tse Tloaelehileng: 15-25matsatsibakeng sa tlhahiso le matsatsi a 20 bakeng sa hlobo.
Q8: U ka tseba joang hore na crucible e hlōlehile?
Mapetso> 5mm leboteng le ka hare.
Botebo ba ho kenella ka tšepe> 2mm.
Deformation> 3% (lekanya phetoho ea bophara ba kantle).
Q9: Na u fana ka tataiso ea mokhoa oa ho qhibiliha?
Li-curve tse futhumatsang bakeng sa litšepe tse fapaneng.
Calculator ea sekhahla sa phallo ea khase e inert.
Lithuto tsa video tsa ho tlosa slag.
